What Is The Difference Between Impulse Sealer And Heat Sealer?

As a manufacturer and a small business owner, you have put so much effort and concern into getting your lovely product ready. You started off with brainstorming a product idea and then spent days figuring out how to manufacture it.Impulse bag sealers

But you stumble the moment you realize you haven’t figured out a way to seal your product. You stress out over what if the product gets damaged or contaminated during its shipping. Here’s when you head on to hunt the right sealer for your product’s packaging.

Whether you should go for an impulse sealer or a heat sealer? Because, while the way you seal your packaging decides the degree of safety and purity of your product, it also greatly influences your customer’s opinion of your product. Therefore, choosing the right sealer for your business is no joke.

Keep reading through the article to get an idea of the main differences between impulse and heat sealers. At the end of the article, you will be able to see through the capabilities of both sealers and decide what’s best for you.

Impulse Sealer vs Heat Sealer

Impulse sealers and heat sealers can be differentiated based on two main points:

• The heating mechanism
• Pre-heat time
• The intensity of heat

Heating Mechanism

The biggest difference that comprehends an impulse sealer and a heat sealer is the heating mechanism they use. A heat sealer is a temperature-controlled machine that provides constant heat to the jaws. The jaws remain hot the whole time the heat sealer is in use which means they do not cool down unless the machine is plugged off. Therefore, they maintain a constant state of heat on the sealing top.

On the contrary, an impulse sealer also uses heat as the sealing mechanism but only heats up when involved in a seal. This means that the jaws of the machine remain hot as long as they are engaged in sealing and immediately cool down otherwise. Hence, decreasing risks of accidental burn or damage.

Pre-heat Time

Since heat sealers maintain a specific temperature for the whole time, they require a pre-heat time to rise to a specific degree of temperature. Therefore, you would have to plug in the heat sealer for some time to pre-heat the jaws before you start to seal.

Whereas, impulse sealers do not require any warm-up time to be pre-heated before use. Rather, they use impulses of electricity to quickly heat the surfaces of the sealing jaw as per requirement.

Intensity Of Heat

Both sealers also differ in the intensity of heat they provide. Here, the material you use for packaging your products plays an important role in deciding which machine best suits you.

As the heat sealers provide a constant state of heat, they allow for a higher melting point with materials. Therefore, they are best for sealing thicker and heavier materials such as Cellophane, Aluminium bags, thicker Mylar, etc.

On the other hand, impulse sealers are best for sealing thinner materials such as Polyethylene and polypropylene, etc, as they do not require a high melting point in order to be sealed.

Therefore, if your product is lightweight, you can rely on thin packaging materials and an impulse sealer. But if you are packaging slightly heavy-weight items, you will be needing thicker packaging materials that can stand your products’ weight, and hence a constant heat sealer will be your absolute alternative to go with.

Conclusion

Now that you have read through all the differences, you might also have gotten a better understanding of your sealing needs. Hence, you can head on to equip yourself with the right sealing machine that aligns with your product.

More reading informative blogs visit here.